Honda Clarity Forum banner

Zencar Level 2 Question

1854 Views 1 Reply 2 Participants Last post by  2002
Feeling a little silly here. I have a newly installed Zencar Level 2 16A-32A charger in my garage and I can't figure out how to use it! :) It doesn't seem to have power. RFID card did not activate the charger. No on/off switch. I checked the panel and the breaker is on. Would love some guidance here.
1 - 2 of 2 Posts
Feeling a little silly here. I have a newly installed Zencar Level 2 16A-32A charger in my garage and I can't figure out how to use it! :) It doesn't seem to have power. RFID card did not activate the charger. No on/off switch. I checked the panel and the breaker is on. Would love some guidance here.
If the display on the Zencar doesn't come on when you plug it into the outlet then the problem is either with the 240V outlet or the Zencar. You can use a multimeter to test the outlet, or just get a replacement Zencar and see if that solves it.

The RFID card is only used to change the amp setting, but the charger display should come on by itself when you plug it in.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top